10-110L/Min Hydraulic Test Unit - 4121 Test units are designed specifically for the speedy diagnosis of hydraulic circuit faults in mobile, marine and industrial systems using normal range of mineral oils, their rugged construction based mainly on mild steel, manganes bronze and acrylic materials makes them ideally suited for arduous use in the field. Each unit is supplied in a convenient carrying case providing full protection and additional storage space for fittings. Because they need no power source such as batteries etc, they are always ready for instant use. The scale on the flow meter can be rotated to ensure visibility in any situation and the installed attitude is not critical, though whenever possible the unit should be monitored with pressure gauge vertical and gauge case relief valve uppermost. The unit is designed for flow to be in the direction of the arrow on the flow meter scale and must not be installed with the flow reversed. Safety An axial flow restrictor valve is fitted which can be adjusted under full load from open to fully closed, and to complete the specification, a safety blow out disc, set to operate at 455 bar is fitted to the manifold in a position facing away from the operator when reading the gauges normally. Two spare blow out discs are supplied which are easily replaced by removing the hexagonal plug on the gauge manifold. • Speedy diagnosis of hydraulic circuit faults. • Flows ranging from 2-360 l/min. • Measuring flow, pressure and temperature. • Portable. No power source required. • Hydrotrac unit for flows from 2-110 l/min available.
Connection/Thread Type: 3/4"
MPN: 4121
Product Code: 4121
This is an online offer only for a Limited Time!
Availability: In stock Only £2497.18 incl VAT.
Free Delivery to the Mainland UK!! Delivery to Europe will be calculated at the checkout screen.
