1/8" NPTF Male X Female 6000 PSI 316 Stainless Steel Needle Valve - PNV-IB-S-2-MF 'HP' series of needle valves are specially designed & manufactured for us in corrosive & hazardous environments. These valves are for use in process control, instrumentation & flow control applications. Feature Benefits: One piece body construction for strength & safety. Non rotating Vee tip design, which forms a bearing joint with the stem eliminating any rotation between the plug & seat on closure ensuring long life. Testing: Each valve is hydrostatically tested in accordance with MSS-SP-99. This procedure includes testing of the body cavity. A Hydrostatic test is performed with pure water or other liquids of similar or lower viscosity at 1.5 times & seat leakage test at 1.1 times of the maximum working pressure. Each valve is also tested with Nitrogen Gas at 1000psi for seat, seal & shell leakage. Other tests like vibration, temperature, Helium are available upon request. Material: Body, Stem, Packing Washer, Lock Nut & Gland Retainer A479-316/A-105 Gland Packing: Glass Filled PTFE Packing: Teflon Handle: Stainless Steel Dust Cap: Plastic Vee Tip: A 564-630