MONUMENT WET AND DRY PRESSURE TEST KIT MON1514 - 1514R
"The H2&O Wet & Dry Test Kit has been designed to offer the professional plumber & installer the equipment to pressure test most common applications with its selection of connectors and gauges Pressures of up to 25 bar can be read from the Gauges with an accuracy of +/- 2.5%. Each gauge is protected with a high shock absorbing rubber boot cover. Additionally a peak reading needle allows for readings to be taken when the gauge is left unattended Connections to copper or plastic tube (15mm & 22mm) or thread (1/2in.BSP & 3/4in.BSP) can be made with the selection of adaptors A 10 bar flexible hose also allows for testing in confined or restricted areas System filling can be achieved with the aid of the 3/4in. tee piece. Kit Contains: 1 x Plastic Carry Case 1 x Dry Test Gauge 63mm diameter (0-4bar) x 15mm JG Speedfit c/w Schrader Valve test point fitted with Peak Reading Needle 1 x 63mm diameter Pressure Gauge (0-11 bar) fitted with Peak Reading Needle 1 x 63mm diameter Pressure Gauge (0-25 bar) fitted with PeakReading Needle 3 x Rubber Gauge Boots fitted to above 1 x Rubber Tap Connector 1 x 10 bar Flexible Hose 1 x Gauge Adaptor 1 x PVC covered chain c/w 2 screws & washers 1 x CP Reducing Bush 3/4in. x 1/2in. 1 x JG Speedfit™ 15mm x 1/2in. stud 1 x JG Speedfit™ 15mm x 1/2in. stem 1 x JG Speedfit™ 22mm x 3/4in. stud 1 x JG Speedfit™ 22mm x 3/4in. stem 6 x O rings 1 x Filling Tee Adaptor 1/4in."
